Are you looking to set up your Teltonika Router RUT240 and connect it with PLC? This article is a step-by-step guide to help you do just that. We’ll cover everything from the initial setup of the router to the connection with PLC.
Introduction
The Teltonika Router RUT240 is an industrial cellular mobile router that provides a secure and reliable internet connection. It’s a great option for remote locations where wired internet is not available, or as a backup connection in case of a primary connection failure. Connecting it with PLC can help you monitor and control your machines and equipment remotely. This guide will help you set up the router and connect it with PLC.
Setting up the Teltonika Router RUT240
To set up the Teltonika Router RUT240, follow these steps:
Step 1: Insert the SIM card
The first step is to insert the SIM card into the router. Make sure that the SIM card is activated and has a data plan.
Step 2: Power on the router
Connect the power adapter to the router and turn it on.
Step 3: Connect to the router
Connect your computer or mobile device to the router’s Wi-Fi network or Ethernet port. The default Wi-Fi network name and password are printed on the router’s label.
Step 4: Log in to the router’s web interface
Open a web browser and enter the router’s default IP address (192.168.1.1) in the address bar. The default login credentials are admin/admin.
Step 5: Configure the router’s settings
Once you’re logged in to the web interface, you can configure the router’s settings according to your needs. Make sure to set up the correct APN settings, as this will determine the internet connection’s quality and stability.
Connecting Teltonika Router RUT240 with PLC
To connect Teltonika Router RUT240 with PLC, follow these steps:
Step 1: Connect the router to PLC
Connect one end of the Ethernet cable to the router’s Ethernet port and the other end to the PLC’s Ethernet port.
Step 2: Configure the PLC’s IP address
Set up the PLC’s IP address to be in the same subnet as the router’s IP address. For example, if the router’s IP address is 192.168.1.1, set the PLC’s IP address to 192.168.1.x, where x is any number between 2 and 254.
Step 3: Configure the router’s port forwarding
Log in to the router’s web interface and go to the Port Forwarding page. Create a new rule to forward the PLC’s IP address and port number to the router’s WAN IP address and port number.
Step 4: Test the connection
Once you’ve completed the above steps, test the connection by trying to access the PLC from a remote location using the router’s WAN IP address and the forwarded port number.
FAQs
Q: What are the benefits of using an industrial cellular mobile router?
A: An industrial cellular mobile router provides a secure and reliable internet connection for remote locations where wired internet is not available, or as a backup connection in case of a primary connection failure.
Q: Can I use a different router instead of Teltonika Router RUT240?
A: Yes, there are many industrial cellular mobile routers available in the market, for example: Alotcer AD7028D(T/Z), Digi TransPort WR21, Sierra Wireless AirLink RV55, Cradlepoint COR IBR900 etc.
Products that can replace RUT240
Here are some alternative products that can replace Teltonika Router RUT240:
- Alotcer AD7028D(T/Z) – Secure Remote Access for Rockwell, Siemens, Schneider + many other PLCs.
- Digi TransPort WR21 – This is an industrial cellular router that provides a secure and reliable connection for remote locations.
- Sierra Wireless AirLink RV55 – This is a rugged industrial LTE-Advanced Pro router that provides a secure and reliable connection for industrial applications.
- Cradlepoint COR IBR900 – This is an industrial-grade router that provides a secure and reliable connection for IoT and M2M applications.
Comparison of main parameters between RUT240 and AD7028D(T/Z) Industrial Cellular Mobile Router
Here is a comparison of the main parameters between Teltonika Router RUT240 and AD7028D(T/Z) Industrial Cellular Mobile Router:
- Network Speed: RUT240 has a maximum network speed of 150 Mbps, while AD7028D(T/Z) has a maximum network speed of 300 Mbps.
- SIM Slots: RUT240 has one SIM slot, while AD7028D(T/Z) has two SIM slots (optional).
- Ethernet Ports: RUT240 has two Ethernet ports, while AD7028D(T/Z) has two Ethernet ports.
- Wi-Fi: RUT240 has 802.11 b/g/n Wi-Fi, while AD7028D(T/Z) has 802.11 a/b/g/n/ac Wi-Fi.
- Operating Temperature: RUT240 has an operating temperature range of -0°C to 75°C, while AD7028D(T/Z) has an operating temperature range of -40°C to 75°C.
Introduction of AD7028D(T/Z) Industrial Cellular Mobile Router
AD7028D(T/Z) is an industrial cellular mobile router that provides a secure and reliable internet connection for industrial applications. It has two SIM slots and two Ethernet ports, and it supports 802.11 a/b/g/n/ac Wi-Fi. It has a maximum network speed of 300 Mbps, and it has an operating temperature range of -40°C to 75°C.
5G full network access, dual-mode SA/NSA, compatible with 4G/3G/2G. Two LAN ports (one can be used as WAN), one RS232/485 port. Supports Electric power protocols 101/104 and Electric power terminal configuration interaction protocol. Dual SIM Card (optional), GPS/Beidou, Electric power encryption/eSIM. Features MQTT, Modbus TCP, OPC UA, Ntirp and DTU functions. Supports IPSEC, L2TP, PPTP, openVPN GRE DMVPN etc. Runs on Linux system and supports Python and C++ secondary development. DC 9~60V input voltage range; communication current of 140mA when online and 120mA when offline (12V). Operating temperature ranges from -40 to +75ºC; product size is 110x85x32mm.
Conclusion
Setting up Teltonika Router RUT240 and connecting it with PLC can help you monitor and control your machines and equipment remotely. The initial setup of the router is straightforward, and connecting it with PLC requires some basic configuration. If you’re looking for an alternative to RUT240, there are many industrial cellular mobile routers available in the market. AD7028D(T/Z) is one such router that provides a secure and reliable connection for industrial applications.
